新闻资讯

Technical articles

×

感谢您的支持,我会继续努力的!

扫码支持
扫码打赏,你说多少就多少

打开支付宝扫一扫,即可进行扫码打赏哦

首页 > 新闻资讯 > NEWS

What are the installation methods and precautions for fixed hydrogen sensors, and what are the commo

来源:DrKsir 时间:2024-09-13 15:23:16

        The installation method and precautions of the fixed hydrogen sensor are as follows:

Drksir Gas sensor system architecture diagram

        First, installation method:

        1. Location selection: According to the point where hydrogen may leak, select a location that is easy to detect and will not be interfered with by other gases.

        2. Fixed installation: Use a suitable mounting bracket or bracket to ensure that the sensor is stable and avoid vibration.

        3. Wiring and debugging: Wiring correctly according to the wiring diagram provided by the manufacturer, including power cord, signal output line, etc., and initial calibration and debugging.

        4. Environment adaptation: Ensure that the installation environment meets the requirements of the sensor operating temperature and humidity. Take measures to prevent dust and water if necessary.

        Second. Precautions:

        1. Ensure that no obstacles block the detection range of the sensor.

        2. Check the working status of the sensor regularly and clean the surface of the sensor.

        3. Ensure that the installation environment is properly grounded according to the electrical safety regulations.

        4. Avoid installation in direct sunlight or in an environment with rapid temperature changes.

        The common faults and solutions of fixed hydrogen sensors are as follows:

        1. Signal drift or instability: Calibrate the sensor regularly, check and clean the sensor, and replace the sensor if necessary.

        2. If no signal is generated, check whether the power cable and signal cable are connected properly and whether the power supply is stable.

        3. Slow response: Check whether the sensor needs to be cleaned or replaced, and confirm whether the detection environment meets the conditions for the use of the sensor.

        4. False alarm: Check whether there is other gas interference, adjust the sensor sensitivity or replace a more specific sensor.

        


关注公众号

了解更多传感器知识

公众号:德克西尔

传感器产品二维码

加微信

购买传感器产品

微信号:Drksir-13515810281

相关内容推荐
How many sensors can the gas alarm control host connect? What are the input signals?

How many sensors can the gas alarm control host connect? What are the input signals?

        The connection ability and input signal type of the gas alarm control host mainly depend on the specifications and design of the specific equipment. Here is a general overview:                1. Connection ability        The number of sensors that can be connected to the gas alarm control host (number of channels) is usually one of its key specifications. Different models of controllers can support different numbers of sensors, ranging from 4 to hundreds. For example, some low-end controllers may only support 4 or 8 channels, while high-end controllers may support 32, 64 or more channels. Of course, the more support routes, the more expensive the price. In large industrial applications, a special 485 chip may be required to extend the connection capability, theoretically supporting a maximum of 128 or 256 sensors.        2. Input signal type        The types of input signals supported by gas alarm controllers typically include:        1. Analog signals: The most common type of input signal is the 4-20mA current ring signal, which is a standard industrial signal used to transmit continuous variables such as gas concentration.        2. Digital signals: such as RS485 bus signals, using Modbus RTU or other proprietary protocols, for digital communication, can transmit more information, such as equipment status, diagnostic information, etc.        3. Switching signals: Some simple controllers may support dry contact or wet contact inputs to trigger alarms or status indications.        
2024.09.12
在线客服

业务咨询

技术咨询

售后服务

PC端自动化二维码
135-1581-0281 (即时通话) 459879587 (在线询价) 135-1581-0281 (长按复制)
扫码加微信